Export - Acisout command in AutoCAD - EXPORT ACIS SAT FILES
You can export certain types of objects into ACIS files in ASCII format (SAT).You can export NURBS surfaces that are trim, domain (regions) and 3D solids to ACIS file in ASCII format (SAT). Other objects such as: lines and arcs are ignored.Use the ACISOUTVER system variable to determine the ACIS version of SAT files exported using the ACISOUT command . ACISOUT only one of the values 15, 18, 20, 21, 30, 31, 40, 50, 60 and 70 of ACISOUTVER ; The default value is 70.
- Create ACIS file - Export command
Call the File Export .... Export Data At the Command prompt dialog box , enter export.
In the Export Data dialog box , enter the file name
Under Files of Type , select the ACIS format (* .sat).
Click
Select objects: Select the objects you want to save as ACIS file until you press ENTER to finish the selection.
Extensions. sat is automatically attached to the file name .
- Create ACIS file - ACISOUT command
Enter the ACISOUT command ¿the following prompt appears:
Select objects: Select the objects to create Acis files
Select objects : ¿The Create ACIS File dialog box appears
In the Create ACIS File dialog box , enter the file name in File Name
Click SavE
Export - Acisout command in AutoCAD - EXPORT ACIS SAT FILES
- Enter ACIS SAT F ile - ACISIN Order
You can import geometry objects saved in SAT (ASCII) files using the ACISIN command . ACISIN transforms the model into a body object or into a solid object ( 3D solids ) and domain ( regions ) if the body is solid or real.The import order is as follows:
Select Insert ACIS File ... the Select ACIS File At the Command prompt dialog box appears , enter acisin.
In the Select ACIS File dialog box , select the file you want to import
Video liên quan
Export AutoCAD file to ACIS file / SAT file:
Câu hỏi thường gặp về Lệnh Export - Acisout trong AutoCAD - XUẤT ACIS SAT FILES:
Làm thế nào để mở lệnh
ACISOUT
trong AutoCAD?- Để mở lệnh
ACISOUT
, bạn có thể gõACISOUT
trong thanh lệnh hoặc tìm kiếm nó trong giao diện người dùng của AutoCAD.
- Để mở lệnh
Làm thế nào để xuất bản vẽ dưới dạng tệp SAT bằng lệnh
ACISOUT
?- Sau khi mở lệnh
ACISOUT
, bạn cần chọn đối tượng hoặc khu vực của bản vẽ mà bạn muốn xuất dưới dạng tệp SAT. Sau đó, bạn cần chỉ định tên và vị trí lưu trữ cho tệp SAT sẽ được tạo.
- Sau khi mở lệnh
Có những tùy chọn nào khi xuất tệp SAT bằng
ACISOUT
?- Khi bạn sử dụng lệnh
ACISOUT
, bạn có thể tùy chỉnh một số tùy chọn, bao gồm:- Name: Đặt tên cho tệp SAT sẽ được tạo.
- Insertion Base Point: Chọn điểm cơ sở để xuất dữ liệu hình học.
- Object Selection: Chọn đối tượng hoặc khu vực cụ thể trong bản vẽ.
- Explode: Chọn cách xử lý đối tượng trước khi xuất. Bạn có thể chọn "Yes" để tách các đối tượng thành các phần riêng lẻ.
- Bind: Điều này liên quan đến việc nếu bạn muốn "ràng buộc" đối tượng sau khi xuất.
- Khi bạn sử dụng lệnh
Làm thế nào để mở tệp SAT sau khi đã xuất nó từ AutoCAD?
- Tệp SAT có thể được mở và sử dụng trong nhiều phần mềm CAD khác nhau. Bạn có thể mở tệp SAT bằng cách sử dụng phần mềm CAD như Rhinoceros, SolidWorks, hoặc bất kỳ ứng dụng nào hỗ trợ định dạng SAT.
Làm thế nào để kiểm tra nội dung của tệp SAT sau khi đã xuất nó?
- Bạn có thể kiểm tra nội dung của tệp SAT bằng cách mở nó trong một phần mềm CAD hỗ trợ định dạng SAT. Trong phần mềm đó, bạn có thể xem và chỉnh sửa hình học của tệp SAT nếu cần thiết.
Nhắp Open. Good luck.See more commands in Autocad hereSee more Autocad courses of the Center here